The Why, What and How: 3 Important Questions to Examine and Improve Tillage Practices

Tillage

A better understanding and awareness of tillage practices is going to be crucial for growers as environmental concerns continue to move towards center stage.

There is a rift tearing families apart. Dogmatic views are causing fissures at dinner tables all across America. People are closing their minds to alternative views of their neighbors and building narratives and echo chambers.

Advertisement

Politics? Nope, I am talking about tillage.

Top Articles
Best Agriculture Apps for 2024 (Update)

Is Tillage All Bad?

Tillage gets a bad reputation. The truth is, no single method of tillage practice is “bad,” as long as it is done mindfully, timely, and with purpose.

Right out of college, I worked in the natural resource conservation market in an area that was focusing on no-till in non-irrigated cereal grains. Now, as I have spent more time in my career, I understand tillage to be a powerful tool, in the right environment and for the right reasons.

Don’t get me wrong, I am still an advocate for minimal tillage if appropriate. However, my experience has taught me that it is not about being on one side or the other. It is about seeing both ends of the tillage spectrum and zeroing in on the right place, in the right parts of the field, for every grower. Not only that, I believe a better understanding and awareness of tillage practices is going to be crucial for growers as environmental concerns continue to move towards center stage.

Full Till, Minimum Till, No-Till

Of all the activities in a farming operation, tillage is often the one that is often done more out of habit than because of careful consideration. Doing tillage without clear purpose can be a waste of time, energy, and money, not to mention erosion risk and land stewardship concerns.

There are certain instances where tillage is necessary. For example, many regions of the U.S. need tillage to improve drainage and increase soil warming in the spring. Soil that is too cold or wet creates a different set of critical failures when we start seeing negative impacts to seed emergence. As more areas experience pesticide resistance, tillage may be the moderation solution to manage a higher volatile environment where chemistry may fall flat.

On the other hand, there are instances when moving to minimum tillage or no-till might be the best solution. A common example is in the Pacific Northwest, where I am based. Average moisture levels of 8-12 inches in spring and summer, and sandy silt loam soils make for a prime environment for minimum tillage. Here, minimal tillage decreases soil erosion, increases soil organic matter, and increases moisture retention.

No-till can also be an important practice in the opposite environment. In high precipitation environments, where moisture comes in heavier events than the soil can absorb, over-tilling can lead to soil erosion through sheet and rill water movements in some cases.

Whether the right course is to stick with an existing tillage strategy or looking to help a grower make the switch to new practices, it is important that trusted advisors dig into the why, the what, and the how with growers. This probing will help ensure their next equipment and agronomy decision goes towards their land’s needs and address any of their concerns.

Question #1: Why are you doing it this way?

Most people think they are aware of why they do something. Yet asking growers this simple “why” often results in an unclear answer.

A common response falls in the “because this is how we have always done it,” camp. There are also the answers that are their own version of, “It is not broken so don’t fix it.”

The problem with these answers is that there is nothing backing up the reasoning. Many growers have no proof that their current tillage strategies are effective or even necessary.

This “why” question typically invites another, one that really gets to the root of the question: Is what you are doing working well?

Measuring the efficiency and success of tillage, in some form at least, is the best way to know if a tillage strategy is the right one for the operation. However, measurement is not always easy and there is no one-size-fits-all way to measure tillage.

Natural Resources Conservation Service (NRCS) official measurements like Soil Tillage Intensity Ratings (STIR) and Soil Conditioning Index (SCI) are among the best and most scientific ways to measure tillage’s effect on soil environments, yet these measurements can be a bit advanced for many growers.

Other methods of measurement are less intimidating and can be a good starting point to uncover areas that need attention. Soil compaction, for example, can be detrimental to crop growth. A penetrometer is a fairly simple tool that measures soil compaction and could give a grower insight into whether or not current tillage practices should be adjusted to improve. Other methods include measuring seed emergence or using soil moisture probes.

Even for growers who are not yet ready to get this detailed, there are ways we can open their eyes to examine current tillage practices to see if they are working well. Simply taking some time to drive around the farm and paying close attention to the topography can go a long way. Are there visible signs of erosion such as bald spots, soil banks down wind, or low spots in the topography? Soil compaction issues can be gauged with visual clues like pooling, salt deposits, or shallow-rooted plants. Also, spend some time understanding soil types and their likeliness of being eroded. This knowledge can also help determine if and what adjustment should be made.

Finally, encourage growers to identify a goal related to tillage practices, even if not super-specific at this point. Do they want to reduce long-term compaction? Perhaps he or she wants to take a more active role in managing erosion.

Once there is a better understanding of how current practices are working and desired outcome of the tillage strategy, it is time to determine if changes should be made.

Question #2: What are the different methods to introduce?

There are numerous tools and technologies that a grower can use to adjust tillage practices. If you have done the homework to first learn about an operation’s tillage practices, including if they are working well and if they fit longer-term goals, now is the time to look at possible alternatives.

Perhaps not every field needs tillage or even certain areas of a field. Some fields may need tillage in the spring while others can wait a bit longer or forgo it altogether. At the very least, a grower can ensure highly erodible land receives less-aggressive tillage than other fields. Technology and tools allow growers to get very specific with tillage practices.

Technology has integrated more “variable rate” tillage options, such as John Deere’s TruSet tillage. By now, most growers have realized their fields are not monochromatic. There are certain areas of a field that may be best served with less aggressive tillage, others where a different angle or pressure would be ideal. With a variable rate system, a prescription is created and the implement will adjust as specified.

In 2018, I started working with a grower and a field that had a sand dune, a rock outcrop, and a silty basin. By implementing TruSet we were able to create a prescription plan that designated the sandy bar un-tilled, then more aggressive tilling in the basin. The rock outcrop was noted so the grower could go around it, avoiding it altogether.

Even for growers less tech-savvy, there are tools available that offer a way to incorporate variable rate tillage on a simpler level; for example, there are tools that allow changing the gang angle. Additional equipment solutions can help a grower improve tillage practices without major investment in new machines such as changing finishing tools on a multi-tool.

These types of options are great for growers going from full-till to a minimum or no-till strategy, but they are also important when looking the other way. Imagine a grower who notices weeds in no-till fields. We are starting to see more and more weeds become pesticide-resistant and burning them away is often not an option. The only remaining choice is to till. The grower can still do so strategically, efficiently, and in the most responsible way. The grower could till just the areas that have the weed, plus a safety zone, and forgo tillage in non-weeded areas of the same field.

When advising growers on potential changes to their tillage practices, do not forget to keep expectations clear. Changing a tillage strategy, particularly going away from full-till, is a long-game effort. It can take several growing cycles, and years of consistent effort to see the effects of those changes.

Question #3: How does tillage strategy impact other decisions?

It is one thing to better understand how tillage practices are impacting certain areas of farm management like erosion control and healthier soil. Another benefit to examining and understanding tillage practices is seeing how they impact other activities on the farm. The best way to do this is document and analyze in a Farm Management Information System (FMIS).

I often find that many growers do not go this far as to document their tillage because they don’t see the benefit and the correlation between those practices to other key practices. The reality is tillage can impact planting, spraying, and harvesting.

A seed needs good soil-to-seed contact and the ability to grow to its full potential. Imagine a field that gets over-compacted – that is going to stunt the crop’s growth. A grower who sees that over-compaction data before planting begins has a chance to address the issue right away. Those who notice a decrease in consistency in emergence may also find that there is some good scouting that can be done and documented to see if compaction or soil temperature could play a role.

There is also value that comes with documenting and viewing tillage along with other data related to planting, spraying and harvest. If a crop yield is higher than anticipated, and both planting and spraying data don’t offer much insight into why, tillage might unlock something important.

A final reason for growers to take the time to document and analyze tillage practices is one that is more of a personal belief of mine. I see tillage as a key player in meeting new environmental challenges. I believe that documenting and measuring the effects of tillage practices is going to become more of a need-to-do versus a nice-to-do.

As soil health and erosion continue to grow in concern and as newer areas like carbon credits take center stage, every grower must be poised to understand and demonstrate the impact of their tillage. These are risks and rewards with tillage. Even in the Certified Crop Advisor circles, more conversations and time are being spent on learning that not every acre needs the same treatments, and long term might cost more than benefit.

The Future of Tillage

Tillage, while one of the hottest topics of debate in farming practices, seems to be one that needs more attention than simple universal approaches such as, “Do it in all fields or in none of the fields.”

However, there is no room for one-size-fits-all thinking in farming or the inefficiencies it creates. Too little tillage can lead to pest concerns and inefficient seed beds.

Perhaps more important than that, the relationship between tillage practices and land stewardship is being scrutinized more than ever. I believe it will continue to be an area where growers are expected – even demanded – to document, analyze, and improve.

As someone who has been dogmatic both in no-till and full-till, I have learned there is plenty of room on both sides and in the middle as long as it is for the right reasons.

2
Advertisement