Tender Choices
September 17, 2008 
View the latest tenders from such suppliers as Ray-Man, Simsonsen Industries, and Doyle Manufacturing.
Field Charger II SF | Ray-Man
The Field Charger II SF has several features, including high-torque hydraulic motors and 40 degree slope on hopper cones. All models come in varying hopper lengths of 12-, 14-, 16-, 18-, 20-, and 24-foot-long truck or skid mount units and 30-, 36-, and 42-foot semi-trailers. Options for the Field Charger include a stainless steel frame package, split bins for micronutrients, stainless steel catwalk, a longer discharge auger, an extra ladder, and manual or electric roll tarps.
BFT8024ST A | Simonsen Industries
Constructed of stainless steel, BFT Series tenders can be equipped with either side or top augers which can be mounted on a trailer or truck chassis. Units are made so they can discharge product at 3,500 pounds per minute. This is accomplished through the use of a 10-inch X 13-inch X 10-inch auger system. BFT Series tenders can be built with two, three, or four hoppers.
16-ton | Doyle Manufacturing
The 16-Ton Side Discharge Tender has four compartments and gate sides made of stainless steel.
SDT-MH | Chandler Equipment
This tender has a 24-ton capacity and features the company’s uniquely designed side discharge auger system. A pit dump option also is available. The auger and tube are constructed of 304 stainless steel.
Super Tender | Adams Fertilizer Equipment
The Super Tender features rack and pinion doors on its belly auger and bottom dump. The unit comes equipped with a roll tarp to protect product during bad weather and a tandem hydraulic pump. It is built with four compartments and has a discharge speed of 4,300 pounds per minute. Other features include a hydraulic folding side discharge, a 72-horsepower Cummins diesel engine, and a stainless steel mid-bearing in the auger with slide door. The capacity for the Super Tender is one of the largest in the industry compared with other tender units, according to the company, at 1,200 cubic feet.
Side Shooter | Willmar/AGCO
The Willmar Side Shooter features multiple compartment hoppers, each constructed using 409 stainless steel. The unit also comes equipped with 40 degree sloped sides for complete product clean out. The Side Shooter is designed with a patented 10-inch X 17-foot single-piece, swing-away auger, which can load products such as potash at a rate of 4,000 pounds per minute. To achieve this rate, the unit is aided by hydraulic controls. The height above frame for the Side Shooter is 82.5 inches and its hopper length is 192 inches. The unit’s total weight when empty is 4,940 pounds.
25-ton Tender | KBH Corp.
Built with two large capacity hoppers constructed of 304 stainless steel, the KBH 25- Ton Tender model is equipped with a Deutz diesel engine, large capacity Webster/Danfoss hydraulic auger motors, and sliding Teflon auger clean-out doors.
Subscribe Today For
