The M3 is a 24-ton side auger tender trailer that features a three-hopper module design, with each of the compartments carrying eight tons — and a total unit capacity of 870 cubic feet. Hoppers are made of 304 stainless steel and have large, easy-slide hydraulic doors as well as hydraulic dump cleanout doors. The tender has a 60 hp air-cooled Deutz diesel engine and an easy-access mounted sealed electric control panel with push-button start and easy read gauges. It rides on a 32-foot Magnolia DOT trailer. Learn more >>

Constructed of 304 stainless steel, the Adams Rear Discharge Trailer Tender has two compartments. Its 21-foot stainless steel auger is adjusted via hydraulic height control. It also features hydraulic hopper feed doors, hydraulic bottom dump doors and two electric vibrators for easy movement of fertilizer. The tender is powered by 40 hp Deutz air-cooled engine with an electric start. A SRT II roll over tarp with 12-inch rise is standard. Ladders are mounted in front and back. Learn more >>

Using the right tender can make all the difference to an applicator’s bottom line when there’s a load of material to move. Willmar’s 24-ton side-shooting tender can be trailer mounted and move up to two tons of material a minute with a large-diameter, 10-inch auger that comes either 17 or 20 feet long. Six compartment hoppers — which can carry a variety of materials — have steep, 40-degree, sloped sides for quick material dispensing. The 24-ton side-shooting tender holds a struck capacity of 774 cu. ft. (885 cu. ft. heaped). Learn more >>

Willmar’s truck-mounted 1600 rear discharge tender is ideal for large farming operations, custom applicators and commercial fertilizer dealers. With a large-capacity hopper (500 cu. ft. struck and 560 cu. ft. heaped) and two compartments that feed into one auger that comes either 19 or 21 feet long, this tender can carry nearly any single, dry-material product and load any applicator or planter at up to two tons per minute. Front and rear ladders provide accessibility to the hopper to improve the sightline of the fill and flow status. Sloped, stainless steel hopper sides provide quick and thorough clean-out.  Learn more >>

Chandler has redesigned its rear discharge tender trailer, increasing the capacity from 20 to 24 tons. Engineers have also added a Deutz diesel engine and made standard a number of features that were previously purchased options, including vibrators on each hopper and hydraulic gates. Learn more >>

Doyle’s 16 FT side discharge truck mounted tender features four modular compartments in a 12 gauge 304 stainless steel. Hoppers have a 40-degree slope. Hydraulically raised and lowered, the 19-foot auger reaches a 14-foot discharge height, with a 1.75 ton-per-minute discharge rate. The main frame is made of heavy duty mild steel square tubing with a mild steel “boxed” support arm and cross braces. Learn more >>

The Doyle 24FT Trailer Tender was designed for efficiency and ease of operation. Its modular, multi-hopper design allows the company to customize units, whether the buyer needs the standard three 258 cubic-foot bins, or the optional six 129-cubic-foot bins, or any combination in between. Bins are constructed of 12 gauge, 304 stainless steel and have a 40-degree side slope. Hydraulically operated, the side discharge auger consists of a 20-foot stainless steel tube with stainless steel flighting. Learn more >>

The Hays 24 ton Tender includes hydraulically operated main doors and clean-out doors, hydraulic vibrators, central lube system, front and rear ladders, an easy-to-use tarp system and a hopper slope design that enhances flow of materials. Included are covered hydraulic hoses, covered air tank and stainless steel augers and bearings. The trailer weight allows for maximum payload. The unit was engineered for easy disassemble and reassemble with an integrated hopper cradle and trailer assembly. Learn more >>

The KBH 26-ton dry fertilizer tender is available in either side or rear discharge with trailer links of 32, 36, 38 and 42 feet – and is also available with a third axle. Auger material options are mild steel, stainless steel or poly-cupped. Standard features include hydraulic hopper and cleanout doors, Agri-Cover SRT tarp, central lube station and front stainless fenders. The unit can be set up for wet kit operation. Learn more >>

The Quickveyor is made of 304 grade stainless steel and an aluminum hopper trailer, offering years of corrosion-free use. It is a multipurpose unit for seed or fertilizer. It has the lightest empty weight, 9,950 pounds with optional aluminum wheels. The Quickveyor has the fastest rate of delivery at 2.8 tons per minute — as well as the largest payload capacity at 27 legal tons. Combining excellent ground clearance, multiple compartments and ease of use with the virtual inability to tip over, the Quickveyor is a sound investment. Learn more >>

Ray-Man builds truck mount tenders and semi-trailers with three different discharge styles. The CHII-SF is a traditional, side-discharge tender. The CHII-FB overhead discharge tender (pictured) can rotate 270 degrees allowing users to unload to the left, right or the rear of the tender. The CHII-CB can be used to transfer fertilizer or grain and is gentle enough to handle seed. Ray-Man offers two grades of stainless steel, split compartments, full-length top catwalks, as well as manual or electric roll tarps. Learn more >>

The BFT series of tenders from Simonsen Industries is available in either truck- or trailer-mount, side or top delivery auger design. Each unit can be customized from numerous options to fit customers’ individual needs including compartment splits, side height, hydraulic drive system, tarp configuration, etc.
Learn more >>